How Lab Grown Diamonds Are Made: CVD vs. HPHT Explained
Dvik Jewels   |    chemical vapor deposition diamond   |    CVD diamond   |    how lab grown diamonds are made   |    How Lab Grown Diamonds Are Made: CVD vs. HPHT Explained   |    HPHT diamond   |    IGI certified diamond   |    lab diamond certification   |    lab grown diamonds
Share
Lab grown diamonds are made using one of two methods: Chemical Vapor Deposition (CVD), which builds a diamond atom by atom from carbon-rich gas at 700 to 1,200°C over two to six weeks, or High Pressure High Temperature (HPHT), which recreates the conditions of Earth’s mantle at pressures exceeding 1.5 million PSI to crystallize carbon onto a seed crystal. Both methods produce diamonds that are chemically, physically, and optically identical to mined stones.
The difference lies entirely in the path, not the destination. Understanding each process helps you read a grading report with confidence, ask better questions when buying, and appreciate why a certified lab grown diamond is every bit as real as one pulled from the ground.
What happens inside a CVD growth chamber?
Every CVD diamond starts with a diamond seed: a thin slice of existing diamond, typically around 300 microns thick, cut from a prior lab grown stone. That seed gets placed on a substrate holder inside a chamber that is evacuated to near-vacuum conditions, dropping pressure below 10⁻⁶ torr to prevent contamination.
Once sealed, the chamber is flooded with a gas mixture of roughly 1 to 5 percent methane in hydrogen. A microwave beam at 2.45 GHz then fires into that gas, splitting the hydrocarbon molecules into carbon radicals and ionized hydrogen. The temperature climbs to between 700 and 1,200°C. Carbon fragments migrate down through the plasma cloud and deposit onto the cooler seed below, bonding layer by layer into the same cubic crystal structure as a natural diamond. Hydrogen plays a second role here: it preferentially etches away any non-diamond carbon that tries to form, keeping the growing surface clean.
Growth is slow by design. Rates typically run between 1 and 10 micrometers per hour. Every few days, the diamond is pulled from the chamber and its top surface is polished to remove any graphitic buildup before being returned to grow again. A finished rough crystal usually takes two to six weeks total, depending on target size. What exits the reactor looks nothing like a gem: it tends to be a blocky, grayish-brown slab.
How does HPHT recreate conditions inside the Earth?
HPHT synthesis works on a different logic entirely. Rather than depositing carbon from a gas phase, it dissolves carbon in a molten metal flux and forces it to recrystallize onto a seed under conditions that approximate the environment roughly 100 miles below the Earth’s surface.
The growth cell is assembled in a specific geometric arrangement: a diamond seed at the cool end, a carbon source such as graphite at the hot end, and a metal catalyst (usually iron, nickel, or cobalt) in between. The entire assembly is loaded into a press capable of generating pressures around 5 to 6 GPa, equivalent to more than 1.5 million pounds per square inch, while temperatures climb to between 1,300 and 1,600°C. Under those conditions, the metal catalyst melts and dissolves the graphite. Carbon then migrates through the liquid metal toward the cooler seed and crystallizes onto it, building up a diamond crystal over one to four weeks.
HPHT tends to produce diamonds with a slightly yellowish or bluish tint because the metal catalyst can introduce trace nitrogen or other elements during growth. The resulting rough crystal is often more octahedral in shape, which suits certain cutting plans well.
What is post-growth treatment, and does it matter?
Both methods frequently produce rough diamonds that need color refinement before they are gem-quality. CVD diamonds in particular often exit the reactor with a brownish or grayish cast, caused by structural defects and trace silicon or nitrogen incorporated during growth.
The standard fix is HPHT annealing: the already-formed diamond is placed back into a high-pressure, high-temperature environment at temperatures above 1,600°C. This does not add material to the stone. Instead, it reorganizes defects at the atomic level, neutralizing the color centers and permanently improving the color grade. By some industry estimates, around 90 percent of CVD diamonds sold as gem-quality stones have gone through this step. That is not a flaw in the process; it is a disclosed and accepted finishing step, comparable to heat-treating a sapphire.
The key word is disclosed. A reputable grading report will note whether post-growth treatment was applied, and a buyer who knows to ask for it can verify the answer before purchasing.
How does a rough diamond become a finished gem?
Leaving the growth chamber, a lab grown diamond is an opaque, unrecognizable lump. Turning it into a gem involves several stages that take real skill.
First comes planning: a gemologist examines the rough under magnification, maps its inclusions, and models the cut that will produce the best combination of size, clarity, and light performance. Because a rough stone can lose 40 to 60 percent of its weight during cutting, this planning stage sets the ceiling for the finished diamond’s value. Laser sawing then divides the rough into workable pieces, after which brushing spins two diamonds against each other to shape the girdle. Blocking places the main facets, and brillianteering adds the remaining facets that create fire and scintillation. Each stone typically requires four to eight hours of skilled work.
The finished polished diamond then goes to an independent grading laboratory.
What does IGI or GIA certification actually confirm?
Certification is not a quality guarantee in the sense that it does not make a diamond better. Think of it as a passport: an independent document that records exactly what the stone is.
An IGI lab grown diamond report documents the stone’s cut, color, clarity, and carat weight on the full 4Cs scales, plus its growth method (CVD or HPHT), its inclusion plot, and a laser-inscribed report number on the girdle. That number links the physical stone to its written record and can be verified instantly on IGI’s website. IGI has been grading lab grown diamonds since 2005 and remains the most widely used certification standard for lab grown stones in 2026. GIA also grades lab grown diamonds, though its current reporting format uses a simplified color and clarity system rather than the full letter grades.
Certification also confirms origin. The report explicitly states that the stone is laboratory-grown, distinguishing it from mined diamonds and from simulants such as cubic zirconia. For a buyer, that statement is the foundation of every other claim a seller makes.
At Dvik Jewels, every diamond in the collection is IGI or GIA certified, so the report travels with the stone and the grades are verifiable before any purchase decision is made. If you want to see what a certified loose stone looks like before it is set, the IGI Certified Round Cut Lab Grown Loose Diamond is a good place to start.
The Process Is the Proof
Both CVD and HPHT produce real diamonds. The method shapes some details: CVD stones tend toward colorless Type IIA material with fewer metallic inclusions, while HPHT stones may carry trace nitrogen and a slightly warmer tint in their rough state. Post-growth treatment is common and, when disclosed, unremarkable. What matters at the end of the chain is the certified finished stone: its cut grade, its color, its clarity, and the independent report that confirms all three.
Knowing how a diamond was grown does not tell you whether it will look beautiful on a finger. But it does tell you that the science behind it is sound, the process is traceable, and a certified stone from a transparent seller gives you every fact you need to choose with confidence.
FAQs
1. Is a CVD diamond better than an HPHT diamond for jewelry?
Neither method produces a superior gem by default. CVD tends to yield colorless stones with fewer metallic inclusions, while HPHT can grow larger crystals in a shorter time. The finished quality depends on the specific growth run, post-growth treatment, and cut. A well-graded stone from either method will perform identically in a ring or pendant.
2. Can a jeweler tell whether a lab grown diamond is CVD or HPHT without a certificate?
Trained gemologists using specialized spectroscopic equipment can usually distinguish the two methods by examining strain patterns and inclusion types. CVD diamonds typically show banded strain patterns, while HPHT stones do not. Without lab equipment, visual inspection alone is not reliable, which is exactly why an IGI or GIA report that states the growth method is worth having.
3. Does post-growth HPHT treatment permanently change a CVD diamond’s color?
Yes. HPHT annealing reorganizes defects at the atomic level within the crystal lattice, permanently neutralizing the color centers that cause brownish or grayish tints. The improved color grade is stable under normal wearing conditions and does not revert. Reputable certification labs note whether treatment was applied, so buyers can confirm the full history of the stone.
4. How long does it take to grow a one-carat lab diamond?
A 1 carat CVD diamond typically requires two to four weeks of growth time, depending on the target size, the growth rate of the specific reactor, and how many stop-and-polish cycles are needed. HPHT growth for a similar stone runs roughly one to three weeks. Neither timeline includes the subsequent cutting, polishing, and certification steps, which add additional weeks before a stone reaches a jeweler.
5. What does the laser inscription on a certified lab grown diamond do?
The report number is laser-inscribed on the diamond’s girdle during the certification process. That inscription links the physical stone to its grading report permanently. A buyer can enter the number into IGI’s or GIA’s online verification tool to confirm that the grades on the certificate match the stone in hand, making it nearly impossible to swap or misrepresent a certified diamond.