Skip to content

Country/region

support@dvikjewels.com +1 (863) 303-7711
Black Friday Day Sale Live — Flat 40% Off
Free Shipping on Orders Above $1499
Free Gift on Orders Above $999
Black Friday Day Sale Live — Flat 40% Off

Do Lab Grown Diamonds Have Inclusions? The Complete Answer

Dvik Jewels   |    CVD inclusions   |    Do Lab Grown Diamonds Have Inclusions? The Complete 2026 Answer   |    eye-clean lab diamond   |    HPHT inclusions   |    IGI lab diamond grading   |    lab diamond clarity grades   |    lab grown diamond clarity   |    lab grown diamond inclusions

Yes, lab grown diamonds do have inclusions. They form during the growth process itself, whether a stone is grown by the HPHT (high pressure, high temperature) method or by CVD (chemical vapor deposition). The types of inclusions differ from those found in mined diamonds, but the clarity grading scale used to evaluate them is the same, running from Flawless all the way down to I3.

That distinction matters more than it sounds. Knowing why inclusions form in a lab environment, and what they actually look like under magnification, puts you in a much stronger position when you read a grading report or compare stones side by side.

Why do inclusions form even inside a controlled laboratory?

The word “controlled” can be misleading. A lab environment controls temperature and pressure with far more precision than the Earth’s mantle ever could, but that does not make the growth process clean in a gemological sense.

In HPHT production, a metal catalyst, typically iron or nickel, is used to dissolve carbon so it can crystallize around a diamond seed. Pieces of that molten metal that do not fully dissolve can become trapped as the crystal grows. In CVD growth, a carbon-rich gas is broken down by microwave energy or a hot filament, and any interruption in the deposition can leave behind pockets of non-diamond carbon inside the crystal lattice. Neither process is a failure when this happens. It is just physics.

What types of inclusions appear in lab grown diamonds?

The inclusion types split fairly cleanly along growth method lines.

HPHT inclusions

Metallic flux inclusions are the signature feature of HPHT stones. They appear as opaque, dark shapes with a reflective metallic luster under magnification, and they can take the form of flat platelets, rod-like needles, or irregular specks. Because they contain iron and nickel, heavily included HPHT stones can sometimes be weakly attracted to a strong magnet, though this is uncommon in gem-quality material. Metallic needles are another common variant: fine, elongated inclusions that tend to follow the crystal’s growth direction.

CVD inclusions

CVD stones do not carry metallic inclusions at all. Their characteristic flaw is non-diamond carbon, essentially graphitic material that failed to crystallize properly. These appear as dark pinpoints or small clouds under 10x magnification. CVD diamonds can also show internal graining, which looks like faint parallel lines or striations running through the stone, a record of slight irregularities in how the crystal layers built up.

Inclusions common to both lab and natural diamonds

Clouds (dense clusters of tiny pinpoints that create a hazy zone) and isolated pinpoints appear in lab grown stones just as they do in mined ones. At lower magnifications, a graphitic pinpoint in a CVD diamond can look nearly identical to a mineral crystal pinpoint in a natural stone.

One important point: inclusions formed during growth are fixed. They do not migrate, expand, or multiply over time, so a VS2 stone you buy in 2026 will look exactly the same under magnification twenty years from now.

How do IGI and GIA grade lab grown diamond clarity in 2026?

This is where things changed significantly in late 2025, and buyers shopping right now need to know about it.

As of October 1, 2025, GIA stopped issuing individual color and clarity grades for lab grown diamonds. GIA’s reasoning was that over 95% of lab grown diamonds cluster within a narrow band of color and clarity, making the detailed letter-grade scale less informative for this category. GIA now describes a lab grown stone as either “Premium” or “Standard,” a two-tier system that tells you far less than a specific grade does.

IGI, by contrast, continues to apply the full D-to-Z color scale and FL-to-I3 clarity scale to every lab grown stone it grades. The clarity scale runs from Flawless (FL), where no inclusions are visible under 10x magnification, down through VVS1/VVS2, VS1/VS2, SI1/SI2, and finally the Included grades (I1 through I3), where inclusions are visible to the naked eye. IGI currently handles roughly 65% of global lab grown diamond certification, and for buyers who want a specific, comparable grade on paper, an IGI report is the practical standard in 2026.

Which clarity grades are considered eye-clean?

Eye-clean is a shopper’s term, not an official grade. It means no inclusions are visible to the unaided eye at a normal viewing distance of roughly 6 to 12 inches. It is the only standard that matters for how a ring actually looks on a finger.

VS1 and VS2 are reliably eye-clean across essentially all shapes and sizes. SI1 is frequently eye-clean, particularly in brilliant cuts such as round, oval, cushion, and pear, where the faceting pattern does a good job of masking internal characteristics. Step cuts like emerald and Asscher are a different story: their large, open facets act like windows into the stone, so VS2 or better is generally needed to achieve a consistently clean appearance.

The practical sweet spot for most lab grown diamond buyers in 2026 is VS1 to SI1. Because lab grown diamonds cost significantly less than mined stones of equivalent size, stepping up from SI1 to VS1 rarely requires a painful budget stretch, which makes it worth considering if you want that extra confidence.

Certification Is What Protects You

Inclusions in lab grown diamonds are not a reason to avoid them. They are a reason to buy certified. An IGI report tells you exactly what grade a stone received, what growth method produced it, and where its clarity falls on a scale you can compare across thousands of stones. A stone sold without certification leaves you guessing at all three.

At Dvik Jewels, every lab grown diamond is IGI certified, which means the grade on paper reflects what a trained gemologist found under 10x magnification, not a seller’s estimate. If you are starting your search, the Lab Grown Diamond Engagement Rings collection includes certified stones across a range of clarity grades, so you can compare directly rather than shop on faith.

FAQs

1. Are inclusions in lab grown diamonds different from those in natural mined diamonds?

Yes. Natural diamonds typically contain trapped mineral crystals, feathers, or clouds formed over billions of years underground. Lab grown diamonds show growth-specific features instead: metallic flux particles in HPHT stones, and non-diamond carbon or graphitic pinpoints in CVD stones. The clarity scale used to grade both is identical, but the inclusion types themselves are distinct.

2. Can you see inclusions in a VS2 lab grown diamond with the naked eye?

In almost all cases, no. VS2 is considered reliably eye-clean across all shapes and sizes, meaning inclusions are minor enough that they are not visible without magnification at normal viewing distance. The inclusions are present and visible under 10x, but they have no practical effect on how the diamond looks when worn.

3. Does the growth method (HPHT vs. CVD) affect which clarity grade I should target?

It can, at the margins. HPHT stones with metallic flux inclusions that are dark and opaque can be slightly more noticeable at a given clarity grade than CVD inclusions, which tend to be subtler. In practice, targeting VS1 or VS2 on an IGI report covers you well regardless of which method produced the stone.

4. Will inclusions in a lab grown diamond get worse over time?

No. Inclusions formed during crystal growth are structurally fixed within the diamond lattice. Unlike some simulants that can cloud or discolor internally, a lab grown diamond’s inclusions remain exactly as they were when the stone was graded, regardless of age or wear.

5. Is an SI1 lab grown diamond a bad choice for an engagement ring?

Not necessarily. In brilliant-cut shapes like round, oval, and cushion, many SI1 lab grown diamonds are genuinely eye-clean. The key is to view the specific stone, whether through high-resolution video, a magnified image, or in person, rather than relying on the grade alone. An eye-clean SI1 in a brilliant cut can offer excellent value without any visible compromise in appearance.

Back to blog

Table of Contents

    Table of Contents

      Categories

      Categories

      Recent Posts

      Do Lab Grown Diamonds Have Inclusions? The Complete Answer

      Do Lab Grown Diamonds Have Inclusions? The...

      Read More
      How Lab Grown Diamonds Are Made: CVD vs. HPHT Explained

      How Lab Grown Diamonds Are Made: CVD vs. H...

      Read More
      Lab Grown Diamond vs Cubic Zirconia: Which Is Better?

      Lab Grown Diamond vs Cubic Zirconia: Which...

      Read More
      Best Online Lab Grown Diamond Jewelers: Full Guide

      Best Online Lab Grown Diamond Jewelers: Fu...

      Read More
      Can You Reset an Old Diamond Into a New Setting? Yes, Here's How It Works

      Can You Reset an Old Diamond Into a New Se...

      Read More
      Diamond Fluorescence Explained: What It Means and Does It Matter

      Diamond Fluorescence Explained: What It Me...

      Read More

      Our Commitment

      Eco-Friendly Diamonds

      Eco-Friendly Diamonds

      Innovation and Design

      Innovation and Design

      Quality Assurance

      Quality Assurance

      Secured Insured Shipping

      Secured Insured Shipping

      24/7 Customer Support

      24/7 Customer Support